«PAO» Omskiy kauchuk

Main technological solutions Receiving chamber KEY PARAMETERS: Possibility to take effluents through several pipelines; Separation of partitions for repair; Bypass corridor; Automatic level control, pH with the output of signals to the dispatching console.

Mechanical cleaning unit Preliminary and fine cleaning Drum grate HUBER Capacity up to m3 / h 2 workers; 1 standby KEY PARAMETERS: Removal of the filtered substances with simultaneous cleaning of the screen by rotating the drum while simultaneously washing the surface of the screen with a jet of water under pressure.

Averaging tank unit KEY PARAMETERS: Averaging of flow by composition and flow Closed system - no emissions into the atmosphere (option) The system of submerged type mixing - maintainability without reservoir emptying; The time required for the polymerization of dissolved components;

Pressure Flotation Unit Vertical pressure head flowmeter MCV KEY PARAMETERS: Reliable protection of ICBMs against peak loads and polymers; Minimum consumption of reagents - reduction of operating costs; Compact solution; Experience in petrochemical and refinery applications; Possibility of location on the street; Patented air dilution system.

SPC Horizontal Pressure Flotator KEY PARAMETERS: Reliable protection of ICBMs against peak loads and polymers; Minimum consumption of reagents - reduction of operating costs; Experience in petrochemical and refinery applications; Patented air dilution system.

The biological treatment unit(MBR) KEY PARAMETERS: High quality cleaning Economical Small footprint

Block of carbon filters Key parameters: Final finishing of treated effluents from hydrocarbons and residual organic substances; In the case of demineralization - reliable protection of reverse osmosis; High degree of automation, centralized control of the unit; Automated reboot of filters.

The block of disinfection Key parameters of disinfection in the ultraviolet spectrum: Absence in reagent washes. Self-cleaning with ultrasonic cavitators; Compact solution; Low operating costs.

Sludge Treatment Unit Decanting centrifuge Alfa Laval AB or GEA Joint treatment of precipitation from lattices and excess active sludge KEY PARAMETERS: Reducing the amount of slurry, reducing the cost of it Transportation and disposal. Continuous operation. Compact modular design provides Saving space. Low installation power reduces consumption Electricity.