Crusher (stonecrusher) the equipment for crushing, that is mechanical impact on solid materials for the purpose of their destruction.

1. jaw crusher 2. cone crusher 3. Rotary crusher 4. hammer crusher 5. roll crusher

Working tools of rotor crushers: 1. Lining plate 2. Rotor 3. Hammer(Bila) 4. Inlet 5. A just device 6. Discharging

The rotor crusher is used for crusher of material with a low and average durability in grains of the shallow size. In capacity, on a rotor bila are fixed. Rotation of a rotor provides splitting stones, crushing happens, a so-called shock method. Also hammer crushers have a similar design. Only instead of beaters, on a rotor express hammers pivotally fasten.

The equipment for subdivision of a conic look represents the loading capacity of a conic form and the cone inserted into it, splitting up. During the work of cones there is a subdivision of material which moves ahead to an output gap. Spindle breakers are suitable for raw materials of high and average degree of hardness. And the material size at the exit can be regulated, establishing a particular gap.

* The design of the roll crusher is made by two shaft which rotate in the counter direction. Between shaft there passes lumpy material, due to compression there is a subdivision and an attrition of raw grain. At the exit the product of fine or medium grinding turns out. The output sizes are regulated, by means of installation of the necessary distance between shaft. The splitting-up shaft can have a smooth, fluted or gear surface

jaw crusher – щековая дробилка cone crusher – конусная дробилка hammer crusher- молотковая дробилка roll crusher – валковые дробилки Rotor crusher – роторные дробилки Equipment - оборудование Impact - воздействие pulley – шкив Squeezing – сжатия Hammer (beaters) – Билы Lining plate – подкладочная пластина(футеровка) Discharging – выходное отверстие Inlet - входное отверстие Housing plate - корпус Durability - прочность shaft - вал springs - пружины