Умные Компрессоры Верное Решение Smart Compressors The Intelligent Solution Игорь Шокин / ВолкмарПфеил Москва; март 2011 Игорь Шокин / ВолкмарПфеил Москва; март 2011 BITZER Kühlmaschinenbau GmbH Игорь Шокин / Волкмар Пфеил Москва; март 2011

BITZER // Shokin-Pfeil-Smart-Compressors // Page 2 Умные Компрессоры – Верное Решение Agenda / Оглавление /History - История /Current Status - Современное состояние техники /Case Study – Примеры /Summary – Резюме

History История

BITZER // Shokin-Pfeil-Smart-Compressors // Page 4 History - История /Simple open type compressors with separate electrical motor /Designed in 1940 /Simple open type compressor combined with mechanical valves & controls in condensing units Умные Компрессоры – Верное Решение

BITZER // Shokin-Pfeil-Smart-Compressors // Page 5 Умные Компрессоры – Верное Решение History – История /Introduction of semi hermetic compressors (BITZER: BHS series) /Paralleling of compressor to centralize and improve system efficiency

BITZER // Shokin-Pfeil-Smart-Compressors // Page 6 Умные Компрессоры – Верное Решение History - История /Introduction of semi hermetic compressors with capacity regulation BITZERs efficient blocked suction concept /Together with paralleling of compressors a nearly step less control With modern systems and lowest possible head pressures maybe not sufficient in winter times

BITZER // Shokin-Pfeil-Smart-Compressors // Page 7 Умные Компрессоры – Верное Решение History - История /Introduction of compressors with external inverter; operating with nominal or reduced frequency /Issues: Correct selection of inverter and motor size Programming and service of inverter Full cost increase no increase in cooling capacity due to no super synchronous operation

Current Status Современное состояние техники

BITZER // Shokin-Pfeil-Smart-Compressors // Page 9 Умные Компрессоры – Верное Решение /Background - Selection of compressors & refrigeration systems Driving forces in the past Mainly initial investment costs Reliability Driving forces at the present time Efficiency improvements driven by Rising energy costs Reduced carbon footprint Green image Competitive advantages Live cycle costs Reliability

BITZER // Shokin-Pfeil-Smart-Compressors // Page 10 Умные Компрессоры – Верное Решение /Background - Selection of compressors & refrigeration systems Most refrigeration systems are predominantly working at part load conditions – however: Cooling capacity must be calculated for max. load under extreme operating conditions Huge over capacity at part load or low condensing temps. Therefore, capacity modulation is essential in many applications Match of capacity with cooling demands Improvement of energy efficiency through Improved dynamic system behaviour Smaller average temperature difference in heat exchangers Reduction of operating/ starting cycles

BITZER // Shokin-Pfeil-Smart-Compressors // Page 11 Умные Компрессоры – Верное Решение /Background - Selection of compressors & refrigeration systems Particularly MT systems in supermarkets feature strong fluctuations in cooling load Seasonal temperature profile – strong capacity changes over SDT Strongly varying loads: day, night, weekend, shopping frequency, possible heat reclaim systems, etc Present systems are mainly designed with multiple compressors and ON / OFF capacity control Dependent on boundary conditions & control regimes strong variations of suction and discharge pressures are apparent Conclusive Requirements Intelligent system control in combination with intelligent compressor capacity modulation in particular important with Low load conditions and/ or low ambient temperatures

BITZER // Shokin-Pfeil-Smart-Compressors // Page 12 Умные Компрессоры – Верное Решение Big potential for condensing temperatures 20°C or below!

BITZER // Shokin-Pfeil-Smart-Compressors // Page 13 Умные Компрессоры – Верное Решение /Inverter operation? On/off operation of 4 compressors in a conventional supermarket system without an inverter

BITZER // Shokin-Pfeil-Smart-Compressors // Page 14 Current Status Requirements on compressor design for high COP and SEER /BITZER developed short stroke OCTAGON piston compressors which are best suited for over synchronous speed Умные Компрессоры – Верное Решение Reduced piston velocity Better discharging process Less throttling losses Higher frequencies possible Improved running smoothness Long stroke design Short stroke design Same displacement Same compressor speed

BITZER // Shokin-Pfeil-Smart-Compressors // Page 15 Умные Компрессоры – Верное Решение Current Status /Octagon piston compressors with integrated inverter Higher specific cooling capacity due to 87 Hz operation Motor and inverter ideally matched Highest motor / inverter efficiency Wide application range Fully EMC qualified (industrial application) Suction gas cooled inverter Preprogrammed Maintenance free

BITZER // Shokin-Pfeil-Smart-Compressors // Page V motor Compressor Frequency [Hz] Power required P [%] Compressor Voltage [V] 4EC-4.2Y (R404A; t o =-10°C; t c =45°C) Power network: 400V-3-50Hz Max motor current: 18.5A Required at Motor voltage: Motor current: Motor power: Motor torque : Available Motor power: Motor torque : 25 Hz 115 V 15.1 A 2.9 kW 34.1 Nm 2.9 kW 34.1 Nm 50 Hz 230 V 15.1 A 5.2 kW 34.0 Nm 5.2 kW 34.0 Nm 60 Hz 276 V 15.1 A 6.3 kW 34.3 Nm 6.3 kW 34.3 Nm X X X Hz 400 V 15.1 A 9.4 kW 35.4 Nm 9.4 kW 35.4 Nm X Smart Compressors The Intelligent Solution Frequency Inverter-Winding Layout 230V-3-50Hz (BITZER VARISPEED) Torque required M

Case Study

BITZER // Shokin-Pfeil-Smart-Compressors // Page 18 Умные Компрессоры – Верное Решение /Example – payback period /Assumptions Constant cooling load: 47 kW Condensing temperature range:t c = 25°C … 45°C Condenser selection: t= 10K Installation location:Moscow, Russia

BITZER // Shokin-Pfeil-Smart-Compressors // Page 19 Умные Компрессоры – Верное Решение /Assumptions Max./ min. capacities at t o =-8°C; t oh =10K, t oh useful =10K, t Cu =10K, w/o subcooling using R404A 4CC-9.F3Y at 87Hz Rack modelsCompressorsCapacityControl method 4CC standard3x 4CC-9.2Ymax.47,4 kW min. 15,8 kW stepped 33 – 66 – 100% VSD1x 4TCS-12.2Y 1x 4CC-9.F3Y max.47,0 kW min. 7,4 kW infinite 15,8 … 100%

BITZER // Shokin-Pfeil-Smart-Compressors // Page 20 Умные Компрессоры – Верное Решение /Results Compressor COP can only be reached if compressor capacity equals the system capacity

BITZER // Shokin-Pfeil-Smart-Compressors // Page 21 Умные Компрессоры – Верное Решение /Payback COP improvement: 18% Amortization period: less than 1 year! Additionally has to be taken in consideration: - Comparison based on constant load - Winter operation leads to an additional COP reduction (standard rack) due to relatively bigger steps and the smaller regulation range

BITZER // Shokin-Pfeil-Smart-Compressors // Page 22 Умные Компрессоры – Верное Решение / Case study ECOSTAR Smart air- cooled condensing unit with frequency inverter and intelligent control

BITZER // Shokin-Pfeil-Smart-Compressors // Page 23 Case study: Conventional scroll unit vs. ECOSTAR unit with VSD: 3 x L2500 show cases Operating conditions: R404a, SST=-4°C, 6-8°C show case temperature Умные Компрессоры – Верное Решение

BITZER // Shokin-Pfeil-Smart-Compressors // Page 24 Умные Компрессоры – Верное Решение /Case study - existing running store in Bangkok/ Thailand Installation 1: conventional scroll unit Installation 2: recip unit with VSD (ECOSTAR) as parallel system Each system operated for 6 days Monitoring of the power consumption by digital power meter Comparison on medium temperature application

BITZER // Shokin-Pfeil-Smart-Compressors // Page 25 Умные Компрессоры – Верное Решение /Case study – test result

BITZER // Shokin-Pfeil-Smart-Compressors // Page 26 Day 1 (kWh) Day 2 (kWh) Day 3 (kWh) Day 4 (kWh) Day 5 (kWh) Day 6 (kWh) Total (kWh) Average (kWh) Scroll on/off unit Power consumption Ecostar unit Power consumption ECOSTAR unit = 25.2% less energy Умные Компрессоры – Верное Решение /Case study – test result

BITZER // Shokin-Pfeil-Smart-Compressors // Page 27 Case study - Life Cycle Cost Savings: In 7 years ~ U$ 11, Умные Компрессоры – Верное Решение /Assumptions: 7 years life cycle of standard CDU No energy cost increase in 7 years Energy cost based on lowest rate of U$ 0.1 /kWh (High energy cost areas will have more savings) Based on to = -4 °C, low temperatures leads to more savings Testing in tropical country, no full advantage on fan speed controller (Under low ambient conditions - more savings)

Summary – Резюме

BITZER // Shokin-Pfeil-Smart-Compressors // Page 29 Умные Компрессоры – Верное Решение /Main drivers for capacity modulation Energy savings and emission reductions (incl. legislations) Quality of chilled products and/ or cooling process Improved components reliability /Resulting priorities in compressor and system developments Capacity adaption to real demand, intelligent control regimes Efficiency optimization related to load profile Operation at lowest possible condensing temperatures Reduced power of auxiliary drives in part load Energy efficiency at full and part load is major target & requirement

Help Safe the World >> Reduce Energy BITZER believes in Inverter technology Спасибо за внимание!