© UGS Corp. 2005. All rights reserved. Whats New I-deas Simulation 11m2 - 12 UGS. - презентация

1 © UGS Corp All rights reserved. Whats New I-deas Simulation 11m UGS

2 © UGS Corp All rights reserved. I-deas 11m2 / 11m3 Export JT format results from I-deas Visualizer Free viewer at Teamcenter Visualization

3 © UGS Corp All rights reserved. I-deas 11m2 / 11m3 TMG 64 bit version on SGI/HP/Sun platforms Allows >2GB memory for large problems Quad Mesh assistant Extension of the Tet Mesh Assistant Goal is a quad dominant mesh (will contain triangles) that will meet automotive body meshing quality requirements Uses section meshing tools and element quality tools to improve mesh quality

4 © UGS Corp All rights reserved. I-deas 11m2 / 11m3 / 12 Support for NX Nastran 3 & 4 SOL 601 & 701 Integrated feel Similar to Model Solution Resizable NX Nastran Solution Monitor form

5 © UGS Corp All rights reserved. I-deas 12 - Automatic Bolt Creation Driven by bolt definition Stored Reusable Geometry based selection FE based connection

6 © UGS Corp All rights reserved. I-deas 12 - Automatic Bolt Creation Graphical preview User defined tolerances Beam cross section table sets diameter Through holes (bolt with nut) Geometry sets length Bolt in tapped hole Bolt definition sets length

7 © UGS Corp All rights reserved. I-deas 12 - Mesh Split Mesh may be split or disconnected at shared surface Multi bodied parts may be modeled as a single partitioned solid and split at partition(s) Geometry or FE based Surfaces FE free faces

8 © UGS Corp All rights reserved. I-deas 12 – NX Licensing Daemon Single FlexLM license daemon for I-deas, NX and NX nastran One license file for all products Model Solution/Nastran Dual License

9 © UGS Corp All rights reserved. NX like capability in I-deas In addition to existing F1, F2, F3 functionality Does not replace - can use either Rotate: Click & hold MB2 Action is identical to existing F3 MB2 (click & release) still works to accept default prompt Pan: Click & hold MB2 + MB3 Zoom: Click & hold MB2 + MB1 Scroll wheel (if available) I-deas 12 – Dynamic Viewing + + or

10 © UGS Corp All rights reserved. Thank You!