TCP (Transmission Control Protocol ) RFC 793 Transport Layer. - презентация

1 TCP (Transmission Control Protocol ) RFC 793 Transport Layer

2 TCP in TCP/IP Stack Media Access Control (Ethernet, Token Ring, FDDI, X.25, PPP, etc.) User Datagram Protocol (UDP) RFC 768 ~ connectionless transport ~ Transmission Control Protocol (TCP) RFC 793 ~ connection-oriented transport ~ Upper-Layer Protocols ~ such as SNMP, telnet, FTP, HTTP, POP3, etc. ~ Upper Transport Network Data Link ARP Internet Control Messaging Protocol (ICMP) RFC 792 Internet Protocol version 4 (IPv4) RFC 791 RARP

3 TCP Overview Byte-stream –app writes bytes –TCP sends segments –app reads bytes Point-to-point: –one sender, one receiver Connection-oriented Application process Write bytes TCP Send buffer Segment Transmit segments Application process Read bytes TCP Receive buffer … …… Full duplex Reliability Flow control: keep sender from overrunning receiver Congestion control: keep sender from overrunning network

4 Connection Establishment Active participant (client) Passive participant (server) SYN, Seq=100 ACK, Seq=101, Ack=1001 time SYNACK, Seq=1000, Ack=101 LISTEN (Passive open) SYN_RCVD SYN_SENT (Active open) ESTABLISHED

5 Connection Establishment TCP uses three-way handshake for reliable connection establishment and termination –Host 1 sends segment with SYN bit set and random sequence number –Host 2 responds with segment with SYN bit set acknowledgment to Host 1 and random sequence number –Host 1 responds with acknowledgment TCP will retransmit lost segments Random sequence numbers ensure synchronization between endpoints Each connection is full duplex

6 Connection Termination Time_wait =2MSL (maximum segment lifetime) */ На практике часто вместо последнего ACK передают RST или ACK,RST Тогда закрытие без ожидания 2MSL client FIN server ACK FIN Active closing Passive closing closed timed wait closed FIN_WAIT_1 CLOSE_WAIT LAST_ACK CLOSED TIME_WAIT

7 TCP Error Control Two types of errors: – Lost packets – Damaged packets Most Error Control techniques are based on: 1. Error Detection Scheme (Parity checks, CRC). 2. Retransmission Scheme. Error control schemes that involve error detection and retransmission of lost or corrupted packets are referred to as Automatic Repeat Request (ARQ) error control.

8 Lost packets TCP uses positive acknowledgment with retransmission to achieve reliable data delivery Recipient sends acknowledgment control messages (ACK) to sender to verify successful receipt of data Sender sets timer when data transmitted; if timer expires before acknowledgment arrives, sender retransmits (with new timer)

9 TCP client states

10 TCP server states

11 TCP Connection Management Modeling The states used in the TCP connection management finite state machine

12 State Transition Diagram for TCP

13 The TCP Segment Header CWRCWR ECEECE

14 Segment Format (2) Each connection identified with 4-tuple: –(SrcPort, SrcIPAddr, DstPort, DstIPAddr) Sliding window + flow control –acknowledgment, SequenceNum, AdvertisedWinow Flags –SYN, FIN, RESET, PUSH, URG, ACK Checksum –pseudo header + TCP header + data Sender Data(SequenceNum) Acknowledgment + AdvertisedWindow Receiver

15 TCP Flags URG (Urgent pointer field is significant) - Поле «Указатель важности» задействовано ACK (Acknowledgement field is significant) - Поле «Номер подтверждения» задействовано PSH (Push function) – получатель должен протолкнуть данные, накопившиеся в приемном буфере, в приложение пользователя RST (Reset the connection) Оборвать соединения, сбросить буфер (очистка буфера) SYN (Synchronize sequence numbers) - Синхронизация номеров последовательности FIN (Final) - флаг указывает на завершение соединения + новый RFC 3168 CWR (Congestion Window Reduced) - Поле «Окно перегрузки уменьшено» - флаг установлен отправителем, чтоб указать, что получен пакет с установленным флагом ECE ECE (ECN-Echo) - Поле «Эхо ECN» - указывает, что данный узел способен на ECN (явное уведомление перегрузки) и для указания отправителю о перегрузках в сети

16 The pseudoheader included in the TCP checksum

17 Options

18 Options(1) Maximum Segment Size Option This option is only used during the establishment of the connection (SYN control bit set) and is sent from the side that is to receive data to indicate the maximum segment length it can handle MSS = MTU – IPHeader – TCPHeader For Ethernet: 1500 – 20 – 20 = 1460 байт

19 Path MTU Discovery. Example. SYN mss = 1460 MTU is 552! I can send datagram with 512 bytes of data. Host 1 Host 2 Router 1 MTU = 1500 MTU = 552 MTU = 296 SYN, ACK mss = 512 1:513 (512) ACK 1:257(256) ACK Router: I cant send so big datagram without fragmentation. But DF bit is set => error occur! ICMP error message: Host 1 unreachable, need to frag, mtu = 296 (newer implementation routers TCP) My MSS now 256 (MTU = 296)

20 Window Scale Option (RFC1323) Option in their SYN segments to enable windows scaling in their direction. The Window Scale expands the definition of the TCP window to 32 bits. Time Stamps Option (RFC1323) The time stamps option sends a time stamp value that indicates the current value of the time stamp clock of the TCP sending the option. Options(2) bytes:

21 Options(3) SACK-Permitted Option This option is set when selective acknowledgment is used in that TCP connection (with SYN bit only) SACK Option Selective Acknowledgment (SACK) allows the receiver to inform the sender about all the segments which are received successfully. RFC

22 TCP Flow Control receive side of TCP connection has a receive buffer: speed-matching service: matching the send rate to the receiving apps drain rate app process may be slow at reading from buffer sender wont overflow receivers buffer by transmitting too much, too fast flow control

23 TCP sliding window TCP uses sliding window for flow control Receiver specifies window –Called window advertisement –Specifies which bytes in the data stream can be sent –Carried in segment along with ACK Sender can transmit any bytes, in any size segment, between last acknowledged byte and within window size

24 A 4-packet window sliding through outgoing data. The window is shown (a) when transmission begins, (b) after two packets have been acknowledged, (c) after eight packets have been acknowledged. The sender can transmit all packets in the window. TCP sliding window

25 TCP Congestion Control

26 Principles of Congestion Control Congestion: informally: too many sources sending too much data too fast for network to handle different from flow control! manifestations: –lost packets (buffer overflow at routers) –long delays (queueing in router buffers)

27 Stop-and-wait operation first packet bit transmitted, t = 0 senderreceiver RTT last packet bit transmitted, t = L / R first packet bit arrives last packet bit arrives, send ACK ACK arrives, send next packet, t = RTT + L / R

28 TCP Slow Start When connection begins, increase rate exponentially until first loss event: –double CongWin every RTT –done by incrementing CongWin for every ACK received Summary: initial rate is slow but ramps up exponentially fast Host A one segment RTT Host B time two segments four segments

29 Дополнительно - Модели реализации протокола TCP и его перспективы