KX-TDE/NCP New Features/Functions Ver.4 (Edition-7) Panasonic System Networks CO.,LTD. - презентация

1 KX-TDE/NCP New Features/Functions Ver.4 (Edition-7) Panasonic System Networks CO.,LTD.

2 Note VoIP Expansion - IP-TSW Speech PathNew MPR Required - 64ch SIP Trunk - VoIP Channel Capacity - DECT-CS on NCP Network Feature Enhancement - Message WaitingA/K is needed - Absent MessageA/K is needed - Called party name display before answerA/K is needed - Call WaitingA/K is needed Network ICD-Group (UCD is supported)A/K is needed Improved Conference Group Function Improved Conference Features Paging to DECT Call-FWD CLIP Improved Centralized VM FunctionA/K is needed New Features/Functions - 1 The new features/functions are available from, - KX-NCP500/1000 MPR Ver.4. - KX-TDE100/200/600 MPR Ver.4.

3 Note Improved Call-FWD N/A Function (Ringing after C-FWD) A/K is needed Improved CA integration Alternative call if VoIP call fails Improve VoIP (H.323) Connection - Support Non-Fast Connect - H323-ID registration Other Improvements - BSS Operation Programming Reserve Bit Function New Features/Functions - 2 The new features/functions are available from, - KX-NCP500/1000 MPR Ver.4. - KX-TDE100/200/600 MPR Ver.4.

4 VoIP Expansion - IP-TSW Speech Path - 64ch SIP Trunk - VoIP Channel Capacity - DECT-CS on NCP

5 VoIP Expansion PBXTDE600TDE100/200NCP1000NCP500 VersionVer.3Ver.4Ver.3Ver.4Ver.2Ver.4Ver.2Ver.4 IP-TSW Speech Path (ch) (*1) SIP-Trunk (ch) IP-PT SIP Ext (ch) IP-PT 32 SIP 128 IP-CS (Units) Ver.4 Improvements *2) H.323 IP-Trunk of NCP500 expands 32ch, same as NCP1000, TDE100/200/600. Trunk/ExtensionProtocolVer.4TTL IP-Trunk H.32332ch (*2) 64 ch SIP Trunk64ch IP-Extension IP-PT128ch SIP-Ext.128ch IP-CS128ch (16 units) *1) New MPR card is needed.

6 MPR IP-TSW Speech Path (113 path) -1 New MPR Card + Ver.3 = 49 path New MPR Card + Ver.4 = 113 path Legacy CO How to identify new H/W Old MPR Card + Ver.4 = 49 path New MPR card is needed. DSP IP CS IP-Ext. IP Trunk

7 IP-TSW Speech Path (113 path) - 2 New H/W Should be XA How to identify new H/W Old H/W

8 Ver ch SIP Trunk -1 16ch x 2 8ch x 1 16ch x 2 16ch x 4 Only Software upgrade. NCP1000 Ver.2 NCP500 Ver.2 TDE100/200/600 Ver 4.0

9 64ch SIP Trunk -2 16ch x 2 Ver 2/3 64ch x 1 Ver.4 supports 64ch SIP Trunk. Supports 64ch by one contract/account Ver 4.0 Ver.2/3 supports 32ch SIP Trunk. Two contracts/accounts (16ch + 16ch) New PCMC Channel Attribute Programming Menu

10 Source -1Source - 2DSP Resource Traditional (CO/Ext.)IP-Trunk (G711)23 Traditional (CO/Ext.)IP-Trunk (G729)55 Traditional (CO/Ext.)IP-Ext./IP-CS (G711)12 Traditional (CO/Ext.)IP-Ext./IP-CS (G729)44 IP-Ext.(G711)IP-Trunk (G711)24 IP-Ext.(G711)IP-Trunk (G729)56 IP-Ext.(G729)IP-Trunk (G711)56 IP-Ext.(G729)IP-Trunk (G729)88 IP-CS (G711)IP-Trunk (G711)35 IP-CS (G711)IP-Trunk (G729)67 IP-CS (G729)IP-Trunk (G711)67 IP-CS (G729)IP-Trunk (G729)99 IP-Ext./IP-CS (G711) 23 IP-Ext./IP-CS (G729)IP-Ext./IP-CS (G711)56 IP-Ext./IP-CS (G729) 88 DSP Resource DSP -4 DSP -16 DSP DSP Power VoIP Channel Capacity - 1 DSP-4/16 DSP-64

11 Talking Party NCP1000NCP500 DSP 4 DSP 16 DSP 64 DSP 4 DSP 16 DSP 64 IP-Trunk IP-PT G G711 G G IP-Trunk SIP G G711 G G IP-Trunk IP-CS G G711 G G IP-Trunk Legacy Ext G G [Restriction Key] DSP Power-1 Number of TDM- IP Channels Number of Trunks Number of Handsets. DSP Power-2 The max. number of simultaneous telephone calls (NCP1000/500). VoIP Channel Capacity - 2 H.323 Trunk SIP Trunk

12 Talking Party NCP1000NCP500 DSP 4 DSP 16 DSP 64 DSP 4 DSP 16 DSP 64 Legacy-CO IP-PT G G Legacy-CO SIP G G Legacy-CO IP-CS G G Legacy-Ext IP-PT G G Legacy-Ext SIP G G Legacy-Ext IP-CS G G VoIP Channel Capacity - 3 [Restriction Key] The max. number of simultaneous telephone calls (NCP1000/500). DSP Power-1 Number of TDM- IP Channels Number of Trunks Number of Handsets. DSP Power-2

13 Talking Party NCP1000NCP500 DSP 4 DSP 16 DSP 64 DSP 4 DSP 16 DSP 64 IP-CS IP-PT G G711 G G IP-CS SIP G G711 G G IP-CS G G711 G G VoIP Channel Capacity - 4 [Restriction Key] The max. number of simultaneous telephone calls (NCP1000/500). DSP Power-1 Number of TDM- IP Channels Number of Trunks Number of Handsets. DSP Power-2

14 Talking Party TDE100/200TDE600 DSP 4 DSP 16 DSP 64 DSP 4 DSP 16 DSP 64 IP-Trunk IP-PT G G711 G G IP-Trunk SIP G G711 G G IP-Trunk IP-CS G G711 G G IP-Trunk Legacy Ext G G VoIP Channel Capacity - 5 [Restriction Key] H.323 Trunk SIP Trunk The max. number of simultaneous telephone calls (TDE100/200/600). DSP Power-1 Number of TDM- IP Channels Number of Trunks Number of Handsets. DSP Power-2

15 Talking Party TDE100/200TDE600 DSP 4 DSP 16 DSP 64 DSP 4 DSP 16 DSP 64 Legacy-CO IP-PT G G Legacy-CO SIP G G Legacy-CO IP-CS G G Legacy-Ext IP-PT G G Legacy-Ext SIP G G Legacy-Ext IP-CS G G VoIP Channel Capacity - 6 [Restriction Key] The max. number of simultaneous telephone calls (TDE100/200/600). DSP Power-1 Number of TDM- IP Channels Number of Trunks Number of Handsets. DSP Power-2

16 Talking Party TDE100/200TDE600 DSP 4 DSP 16 DSP 64 DSP 4 DSP 16 DSP 64 IP-CS IP-PT G G711 G G IP-CS SIP G G711 G G IP-CS G G711 G G VoIP Channel Capacity - 7 [Restriction Key] The max. number of simultaneous telephone calls (TDE100/200/600). DSP Power-1 Number of TDM- IP Channels Number of Trunks Number of Handsets. DSP Power-2

17 DECT-CS on NCP CS factor Ver.2Ver.4 NCP500NCP1000NCP500NCP1000 CS KX-TDA KX-TDA0141/ KX-NCP Max. CS factor Max. PS64 The max. number of CS/PS.

18 Network Feature Enhancement

19 Network Feature Enhancement The following features are newly supported from Ver.4 1When calling extension in other PBX - Leave Message Waiting - Absent Message Display - Called party name display before answer 2When extension in other PBX is busy - Call Waiting - Busy Override - Call Back - Call Monitor - Leave Message Waiting 3When extension in other PBX is DND - DND Override, DND tone and LCD 4Incoming call from extension in other PBX - Ring tone (Single or Double) as extension call - Call Waiting - Call FWD / DND as extension call - Automatic answer as extension call - Extension call block by COS-COS 5Incoming call to extension in other PBX - Directed Call Pickup

20 1- Ext.1001 calls Ext.2001 (Busy) 2- Ext.1001 receive Busy Tone 3- Press Message Waiting button on Ext The Message Waiting LED on Ext.2001 turns Red. - Ext.2001 can call back to Ext.1001 press Message Waiting button. The function works over, Extension Numbering & PBX Numbering. Free/Busy Message Waiting 1- Ext.1001 calls Ext.2001 (Free) 2- Ext.2001 does not answer. 3- Press Message Waiting button on Ext The Message Waiting LED on Ext.2001 turns Red. - Ext.2001 can call back to Ext.1001 press Message Waiting button. Ext.2001 Call Ext.1001 VoIP-Net Network Feature Enhancement - 1 A/K is needed

21 Absent Message Display 1- Ext.1001 calls Ext.2001 (Absent Message Go Home) 2- Go Home is displayed on Ext Absent Message Go Home The function works over, Extension Numbering & PBX Numbering. 2. Send Go Home Go Home Ext Call Ext.1001 VoIP-Net Network Feature Enhancement - 2 A/K is needed

22 Ext.1001 Tanaka Calling party name display before answer (Already Supported) 1- Ext.1001 (Tanaka) calls Ext Calling party name (Tanaka) is displayed on Ext Ext.2001 The function works over, Extension Numbering & PBX Numbering. 2. Send Tanaka Tanaka Call 1001: Tanaka Before Ver.4 External call Ver.4 Internal call VoIP-Net Network Feature Enhancement - 3 A/K is needed

23 Ext.2001 Honda Called party name display before answer 1- Ext.1001 (Tanaka) calls Ext Calling party name (Tanaka) is displayed on Ext Called party name (Honda) is displayed on Ext The function works over, Extension Numbering & PBX Numbering. 2. Send Tanaka 2001: Honda 1. Call Ext Send Honda VoIP-Net Network Feature Enhancement - 4 A/K is needed

24 1. Call 2- Ext.1001 LCD 1- Ext.1001 calls Ext.2001 (Busy) 3- Press WAIT button. 4- Call waiting on Ext Ext.1001 The function works over, Extension Numbering & PBX Numbering. Call Wait 3. Press WAIT 2. Send Busy Info. WAIT OVER C.BCK 2001: Busy 4. Call Wait Ext.2001 Talking Ext.2002 VoIP-Net Call waiting : ON Network Feature Enhancement - 5 Call waiting (Ext.2001) has to be ON. A/K is needed

25 2- Ext.1001 LCD 1- Ext.1001 calls Ext.2001 (Busy) 3- Press OVER button. 4- We can override (Barge-in) the communication between Ext.2001 and Ext.1001 The function works over, Extension Numbering & PBX Numbering. Busy Override 2. Send Busy Info. WAIT OVER C.BCK 2001: Busy Ext.2002 Talking 3. Press OVER 4. Override 1. Call Ext.2001 VoIP-Net Network Feature Enhancement - 6 A/K is needed

26 2- Ext.1001 LCD 1- Ext.1001 calls Ext.2001 (Busy) 3- Press 5 button. 4- We can monitor the communication between Ext.2001 and The function works over, Extension Numbering & PBX Numbering. Call Monitor 2. Send Busy Info. WAIT OVER C.BCK 2001: Busy Ext.2002 Talking 3. Press 5 4. Monitor Ext.2001Ext Call VoIP-Net Network Feature Enhancement - 7 A/K is needed

27 Related program. Ext.2001 Busy Related program for Call Monitor/Busy Override Ext.2002 Talking Monitor/Busy Override Ext.1001 VoIP-Net Network Feature Enhancement - 8

28 Related program. Related program for Busy Override Ext.2002 Talking Monitor/Busy Override Ext.2001Ext.1001 VoIP-Net Network Feature Enhancement - 9

29 2- Ext.1001 LCD 1- Ext.1001 calls Ext.2001 (Busy) 3- Press C-BCK button. 4- When Ext.2001 became idle, Ext.1001 starts ring. (Call back starts) Ext.1001 The function works over, Extension Numbering & PBX Numbering. Ext.2001 Busy Call Back 2. Send Busy Info. WAIT OVER C.BCK 2001: Busy 3. Press C.BAK Busy 1. Call VoIP-Net Network Feature Enhancement - 10

30 2- Ext.1001 LCD 1- Ext.1001 calls Ext.2001 (DND) - DND Tone on Ext Press OVER button. 4- Ext.2001 starts ringing. Ext.1001 The function works over, Extension Numbering & PBX code Numbering. Ext.2001 Busy DND 2. Send DND Info. OVER 2001: Do Not Disturb DND We can see the other end set to DND 3. Press OVER 4. Ring 1. Call VoIP-Net Network Feature Enhancement - 11 A/K is needed

31 Ext.1001 Ext.2001 Busy DND 2. Send DND Info. DND 3. Press OVER 4. Ring Related program. 1. Call VoIP-Net Network Feature Enhancement - 12 A/K is needed

32 Ext.2001 Busy Ring tone (Single or Double) as extension call 2. Ring 1- Ext.1001 calls Ext Ext.2001 starts ringing. Ver.4.0: Internal call ring tone. Before Ver.4.0: External call ring tone. The function works over, Extension Numbering & PBX code Numbering. Ext Call VoIP-Net Network Feature Enhancement - 13 A/K is needed

33 Ext.2001 Busy Auto Answer 1- Ext.1001 calls Ext Ext.2001 answers the call automatically. Ver.4.0: Possible Before Ver. 4.0: No possible Internal call Auto Answer = Enable The function works over, Extension Numbering & PBX code Numbering. Ext Call VoIP-Net Network Feature Enhancement - 14 A/K is needed

34 CO Ext.2001 Busy Call-FWD setting on Ext.2001 PBX-2 We can set different C-FWD destination on Ext.2001 for external calls and other PBX call (Internal) calls. E.g. Internal call destination: Call from Ext.1001 and Ext.2002 External call destination:Call from external (Through PBX-1) PBX-1 Ext.2002 Call The function works over, Extension Numbering & PBX code Numbering. Ext.1001 VoIP-Net Network Feature Enhancement - 15 A/K is needed

35 1- Ext.2002 calls Ext Ext.2001 starts ringing. 3- Ext.1001 can pick up the call on Ext.2001 The function works over, Extension Numbering and PBX numbering. Pick up call (Direct call pick up) 3. Pick up Ext Call Ext Ring Ext.1001 How to program ? VoIP-Net Network Feature Enhancement - 16

36 Pick up call (Direct call pick up): Extension Numbering 3. Pick up (Press a DSS (20**412001) 1. Call Ext Ring Ext ** DSS The target PBX numbering plan + * Ext. No Access code VoIP-Net Network Feature Enhancement - 17 *40 (Pick-up by group number) does not support A/K is needed

37 Pick up call (Direct call pick up): PBX Numbering 3. Pick up (Press a DSS (72*411001) 1. Call Ext Ring Ext * DSS Ext. No Access code PBX code 2 PBX code 1 TIE access + PBX number VoIP-Net Network Feature Enhancement - 18 A/K is needed

38 Ext.1001 Pick up call (Direct call pick up): CA Ver.3 (Future Plan) Ext Call Ext Ring CA Server CA Ver.3 Monitor 3. Pick up VoIP-Net Network Feature Enhancement - 19 A/K is needed

39 Paging with Pick up call (Direct call pick up) 1. Call Ext.2001 Ext.2002 PBX-1PBX-2 Ext.1001 Ofiice-2 Audio port 1- Ext.2001 calls Ext On Ext.2002 (Voice Call is available Paging) 3- Ext.1001 can pick up (72*412002) the call on Ext Paging 3. Pick up Ext.2002 is a PBX-2 extension. VoIP-Net Network Feature Enhancement - 20 Ofiice-1 A/K is needed

40 When Ext.2001 calls Ext Ver.4.0: Ext.1001 starts ring. Before Ver.4.0: Busy Tone Ext.1001 Improved Boss/Secretary function Ext.2001 Boss (C-FWD to Ext.2001) Secretary Call Ext.1001 The function works over, Extension Numbering & PBX code Numbering. VoIP-Net Network Feature Enhancement - 21 A/K is needed

41 Ext.2001 COS-1 Internal call Block (COS-COS setting) Ext.1001 (COS-1) calls Ext.2001 (COS-1):Not Blocked Ext.1002 (COS-2) calls Ext.2001 (COS-1):Blocked Ext.1002 COS-2 The function works over, Extension Numbering & PBX code Numbering. Ext.1001 COS-1 COS Information Call Block Call VoIP-Net Network Feature Enhancement - 22 A/K is needed

42 Auto answer enable/disable by COS Ext.2001 Ext.1001 COS-2 Call Auto Answer=ON Ext.1002 COS-3 Calling Ext.Ext.2001 Ext.1001 (COS-2)Auto Answer Ext.1002 (COS-3)Ringing COS Information VoIP-Net Network Feature Enhancement - 23 A/K is needed

43 Internal call works this feature Auto answer enable/disable by COS Ext.2001 Ext.2003 COS-3 Ext.1001Auto Answer=ON Ext.1002 Calling Ext.Ext.2001 Ext.2002 (COS-1) Auto Answer Ext.2003 (COS-3)Ringing Ext.1001 (COS-2)Auto Answer Ext.1002 (COS-3)Ringing Call VoIP-Net Ext.2002 COS-1

44 Network ICD-Group

45 Virtual PS Ext.1003 C-FWD = 2002 Before Ver.4. Network ICD-Group Ext.2002 Ext.2001 Ext.1002 ICD-Group Ext.1000 Ring Ext.1001 Call CO VoIP-Net

46 Virtual PS Ext.1003 C-FWD = 2002 Network ICD-Group Ext.2002 Ext.2001 Ext.1002 ICD-Group CO ICD-Group Ext.1000 Ring (Already Supported) UCD (Ver.4) Hunt (Ver.4) Ext.1001 Note: Automatic Log-out is not support for Virtual PS. Call Ver.4. VoIP-Net

47 Improved Conference Group Function

48 Conference Group mode programming Improved Conference Group Function - 1 Ver.4: Flexible Program Before Ver.4: System Program

49 OwnerTwo-way N/A OwnerTwo-wayOne way N/A OwnerTwo-wayOne way Group-8: 8-Party Conference Mode Group-2: Broadcast Total 32 Terminals Conference Group mode programming (Ver.4) Group-1: 8-Party Conference Mode Improved Conference Group Function - 2

50 Owner Joining external participants Conference Group If an owner wants to have a conference with only external participants. How to achieve ? Before Ver.4 Conference Group Before a conference is established, the external participant cannot join. Owner Improved Conference Group Function - 3

51 3. Join - An owner establishes a group conference with physical connection D-PT or Softphone. - An external participant joins the conference. - The owner presses the DSS button of the D-PT twice. - Press Flash/Recall key. Cuts the D-PT from the conference. Advise solution D-PT or Softphone Auto Answer = ON Auto Answer mode works for conference group call on Ver.4. Owner Conference Group Ver.4 1. Call 2. Conference is established. 4. Cuts the D- PT. Joining external participants Improved Conference Group Function - 4

52 Reserve Bit Function (0A-6) Default (Disable) The above function does not work. A D-PT (Auto Answer = Off) in conference group: An owner establishes a group conference Compulsory D-PT Auto answer function Enable. 0A-6=Disable 0A-6=Enable This is PSN plan Owner Conference Group Auto Answer = OFF Call Improved Conference Group Function - 5

53 Improved Conference Features

54 CO Subscriber-A Subscriber-B Improved Conference Features - 1 Ext Ext.1001 (Owner) holds three party conference. Subscriber- A, Subscriber-B 2- Ext.1001 on-hooks All connection disconnects. Before Ver.4 Function Customer wants to keep CO-to-CO connection. Owner Three party conference.

55 Improved Conference Features - 2 Ver.4 New Option CO-CO call Limitation Enable: Default (Before Ver. 4 New function) Disable: Option (Ver. 4 New function)

56 CO Improved Conference Features - 3 Ver.4 Function (CO-CO call Limitation = Disable) 3. The PBX is keeping CO-to-CO connection. 1. Ext.1001 (Owner) holds three party conference. CO Subscriber-A Subscriber-B Ext.1001 Subscriber-A Ext.1001 Subscriber-B 2. Ext.1001 on-hooks. NB: This operation does not work for conference group call. Owner

57 CO Subscriber-A Ext.1002 Improved Conference Features - 4 Ext Ext.1001 (Owner) holds three party conference. Subscriber- A and Ext Ext.1001 on-hooks The PBX keeps Subscriber- A and Ext.1002 connection. Owner Working scenario

58 CO Subscriber-A Ext.1002 Improved Conference Features - 5 Ext Ext.1001 (Owner) holds three party conference. Subscriber- A and Ext Ext.1001 on-hooks The PBX keeps CO to Ext.1002 call. Working scenario Owner VoIP-Net

59 Ext.1003 Improved Conference Features - 6 Ext Ext.1001 (Owner) holds three party conference. Ext.1002 and Ext Ext.1001 on-hooks The PBX keeps Ext.1002 to Ext.1003 call. Owner Ext.1002 VoIP-Net Working scenario

60 CO Subscriber-A Ext.1002 Subscriber-B Improved Conference Features - 7 Ext Ext.1001 (Owner) holds four party conference. Subscriber- A, Subscriber-B and Ext Ext.1001 on-hooks All connections disconnect. Owner Not working scenario

61 Paging to DECT (by using auto answer/conference)

62 Ext.1001 Auto- Answer=ON Paging to DECT Call Ext.2001 Auto-answer function also works a conference group call. 3. Speaker automatically ON 1. Ext.1001 calls Ext.2001 (Auto-Answer=ON) 2. The PBX calls Ext Ext.2001 speaker phone automatically ON. Ext.2001 Auto-answer function for DECT 2. Call

63 1. Dial *321# Ext.2003Ext.2001Ext.2002 Auto- Answer=ON 1.Ext.1001 holds a conference (*321#) 2. The PBX calls pre-programmed DECT-PS 3. All DECT PS on the conference group automatically answer. Speaker phone automatically ON. 4. Ext.1001 user can page. Paging to DECT - 2 Auto-answer function for Conference Group Conference Group No.1 3. Speaker automatically ON Ext Call 4. Paging

64 Ext.1001 Ext.2003Ext.2001Ext.2002 Auto- Answer=ON Broadcasting modeMax. member Max. talker When paging starts, Enable328 DECT-PS cannot speak at first. Disable88 DECT-PS speak at first. Conference Group No.1 -DECT user and SLT user can make conference group call as well as PT user. - Hand over is supported for conference group call after DECT answers. (Ver. 3 does not support hand over for conference group call.) - One DECT-PS needs one wireless channel. Paging to DECT - 3

65 Reserve Bit Function (0A-7) Default (Disable) 0A-7=Disable 0A-7=Enable Owner Conference Group Auto Answer = Off Call Paging to DECT - 4 This is PSN plan The above function does not work. A PS (Auto Answer = Off) in conference group: An owner establish a group conference Compulsory PS Auto answer function Enable.

66 Call-FWD CLIP

67 ISDN 1- Ext.1000 calls Ext The call is re-routed to subscriber-A. 3- CLIP? Ext.1000 CLIP or Ext.1001 CLIP? Subscriber-A Ext.1001 CLIP C-FWD to Subscriber-A Call-FWD CLIP - 1 (Internal call) The PBX sends as CLIP The PBX sends as CLIP CLIP ? Calls Ext.1000 CLIP

68 ISDN 1- Ext.1000 calls Ext.6000 (ICG-D) 2- The call is re-routed to subscriber-A. 3- CLIP? Ext.1000 CLIP or Ext.2000 CLIP? Ext.1000 CLIP Subscriber-A The PBX sends as CLIP The PBX sends as CLIP CLIP ? Dummy PS Ext.2000 CLIP C-FWD to Subscriber-A ICD-G 6000 Ext.1001 Calls Call-FWD CLIP - 2 (Internal call)

69 ISDN Subscriber-A Ext.1000 CLIP C-FWD to Subscriber-B 1- Subscriber-A calls Ext The call is re-routed to subscriber-B 3- CLIP? Subscriber-A CLIP or Ext.1000 CLIP? The PBX sends as CLIP The PBX sends Subscriber-A CLIP as CLIP Call-FWD CLIP - 3 (External call)

70 ISDN Subscriber-A Dummy PS Ext.2000 CLIP C-FWD to Subscriber-B ICD-G 6000 Ext.1000 CLIP Subscriber-B 1- Subscriber-A calls Ext.6000 (ICG-D) 2- The call is re-routed to subscriber-B 3- CLIP? Subscriber-A CLIP or Ext.2000 CLIP? The PBX sends as CLIP The PBX sends Subscriber-A CLIP as CLIP Call-FWD CLIP - 4 (External call)

71 Improved Centralized VM Function

72 VoIP-Net VM transfer over network Improved Centralized VM function - 1 Ext.2002 Ext.2001 CO 2. Press VTR # 1. Call Mail-BOXExt (PBX-1) (PBX-2) (PBX-2) Ext Ext.1001 receives a call. 2. Press the VTR button and dial remote extension number + #. 3. The call goes to Ext.2001 mail Box. PBX-1PBX-2 Centralized VM 3. Go to Ext Mail BOX

73 VoIP-Net VM transfer over network Improved Centralized VM function - 2 Ext.2002 Ext.2001 CO 2. Press VTR # 1. Call Mail-BOXExt (PBX-1) (PBX-2) (PBX-2) Ext Ext.2001 receives a call. 2. Press the VTR button and dial remote extension number + #. 3. The call goes to Ext.1001 mail Box. PBX-1PBX-2 Centralized VM 3. Go to Ext Mail BOX

74 VoIP-Net VM transfer over network Improved Centralized VM function - 3 Ext.2002 Ext.2001 CO 2. Press VTR + NDSS Button 1. Call Mail-BOXExt (PBX-1) (PBX-2) (PBX-2) Ext Ext.2001 receives a call. 2. Press the VTR button and Press the NDSS button for Ext The call goes to Ext.1001 mail Box. PBX-1PBX-2 Centralized VM 3. Go to Ext Mail BOX NDSS (Ext.1001)

75 Transfer re-call Destination Improved Centralized VM function - 4 Ext.2001 CO 1. Call Mail-BOXExt (PBX-1) (PBX-1) (PBX-2) Ext.1002 C-FWD N/A to VM Step 4. Before Ver.4Transfer re-call to Ext.1001 Ver.4The call is re-routed to the Centralized VM PBX-1PBX-2 Centralized VM Ext Transfer to Ext.1002 Un-screened 3. Does not answer VoIP-Net

76 Improved Call-FWD N/A Function

77 CO C-FWD N/A function before Ver.4 Improved Call-FWD N/A Function - 1 Ext.2002 Ext.2001 Subscriber-A Call-FWD N/A to Subscriber-A N/A Timer=15sec 1. Call 3. Fwd to Subscriber-A 1. Ext.2002 calls Ext Ext.2001 starts ringing, 15sec. 3. The call is forwarded to the subscriber-A Ext.2001 stops ringing. 2. Ring.

78 CO C-FWD N/A function Ver.4 Ext.2002 Ext.2001 Subscriber-A Call-FWD N/A to Subscriber-A N/A Timer=15sec 1. Call 3. Fwd to Subscriber-A 1. Ext.2002 calls Ext Ext.2001 starts ringing, 15sec. 3. The call is forwarded to the subscriber-A Keep ring after FWD NA to CO Enable Ext.2001 keeps ringing. Disable Ext.2001 stops ringing. 4. The subscriber-A and Ext.2001 can answer the call. 2. Ring. Improved Call-FWD N/A Function - 2 A/K is needed

79 CO C-FWD N/A function Ver.4 Ext.2002 Ext.2001 Subscriber-A Call-FWD N/A to Subscriber-A N/A Timer=15sec 1. Call 3. Fwd to Subscriber-A 2. Ring. CO TypeAvailable SIP/H.323 G/WYES ISDNYES Analogue W/ ReverseYES W/O ReverseNO CPC Analogue LineNO E1YES T1 LCONO GCO/DID/E&MYES The Keep ring after FWD NA to CO Function is available on the following CO Improved Call-FWD N/A Function - 3

80 CO C-FWD N/A function Ver.4 Ext.2002 Ext.2001 Subscriber-A Call-FWD N/A to Subscriber-A N/A Timer=15sec 1. Call 3. Fwd to Subscriber-A 2. Ring. Ext Ext.2002 calls Ext.2001 DSS flashing sec DSS flashing. 3. The call is forwarded to the Subscriber. 4. The Subscriber does not answer DSS flashing. 5. The Subscriber answers DSS turns Red. This situation differs from the usual DSS display. Actually, Ext.2001 is not busy, other extension can call to Ext Improved Call-FWD N/A Function - 4 If Ext.2001 DSS is assigned on other Ext.

81 C-FWD N/A function Ver.4 Ext.2003 Ext.2001 Call-FWD N/A Ext.2003 N/A Timer=15sec 1. Call 2. Ring. Improved Call-FWD N/A Function - 5 Ext Ext.2002 calls Ext Ext.2001 starts ringing, 15sec. 3. The call is forwarded to Ext Ext.2001 stops ringing. 3. Fwd to Ext.2003 If Ext.2001 is set C-FWD to Internal.

82 Improved CA integration

83 Improved CA integration When CA user logs to PBX (Ver.4), the PBX send Manager and CA Chat Ability information to CA. CA Client-1 1. Log-in 2. Data Support from CA Ver.3 Disable un-necessary chat Disable manager function from basic CA client Send system data to CA

84 Improved CA integration CA Display changed Absent Message is not automatically changed. Ver.4 Absent status is not displayed from Ver.4. PROG INFO RING MENU THU 09:40 - * PROG INFO RING MENU 10 JUN. 09:40 THU Not in used Before Ver.4 Absent status is displayed automatically by CA when PC is not used for pre programmed time. Customer does not like this change.

85 Alternative call if VoIP call is fails (CO call ARS VoIP call Failed CO call)

86 NTT-CO Dials Alternative call if VoIP call fails (0) PBX-Japan BT CO Telephone cost are high. Standalone system International access code Subscriber No. CO access code Country code

87 VoIP Net NTT-CO +44 (0) TG-2 PBX-Japan PBX-UK BT CO ARS=ON Using remote PBX and VoIP and ARS function Save cost !!! Modify the dialled number by ARS table. Dials Alternative call if VoIP call fails - 2

88 NTT-CO +44 (0) TG-2 PBX-Japan PBX-UK BT CO ARS=ON If VoIP Network is Down ? VoIP Net = Down Using remote PBX and VoIP and ARS function Modify the dialled number by ARS table. Dials Alternative call if VoIP call fails - 3

89 NTT-CO ARS=ON Dials Checks Quick Dialling table YES Re-order Tone NO The call is VoIP call ? (0) TG-2 PBX-Japan PBX-UK BT CO VoIP Net = Down No- response A new function from Ver.4. Using remote PBX and VoIP and ARS function Modify the dialled number by ARS table. Modify the dialled number by Quick Dial table. Alternative call if VoIP call fails - 4

90 Programming ARS Please do not select On for any CO Access Operation Modify the dialled number by ARS table. Select On for Local Access Operation Alternative call if VoIP call fails - 5

91 Programming Quick Dial Need to Check CO access No. Trunk access No. Alternative call if VoIP call is failed - 6

92 Reserve Bit Function (09-6) Default (Disable) The alternative call function does not work. The alternative call function on Ver =Disable 09-6=Enable From TDE/NCP V4. Alternative call if VoIP call fails - 7 CO call ARS VoIP call Failed CO call The alternative call function works. CO call ARS VoIP call Failed CO call CO call ARS VoIP call Failed Re-order tone

93 Improve VoIP (H.323) Connection

94 VoIP Net H323 IP-G/W Call Receiving call (a non-Fast connect mode call): Before Ver.4: PBX does not accept the call. Ver.4: PBX accepts the call. Improve VoIP (H.323) Connection - 1 Support Non-Fast Connect Virtual H323 IP-G/W Call This improvement is adapted only for virtual gate way. (Not for LPR card gate way)

95 VoIP Net H323 IP-G/W Call Making call: The TDE/NCP makes a call with fast connection mode. The other PBX replies with non fast connection mode. Before Ver.4: PBX does not accept this reply, disconnect the call. Ver.4: PBX accepts this reply Improve VoIP (H.323) Connection - 2 Support Non-Fast Connect Virtual H323 IP-G/W 1. Call2. Reply This improvement is adapted only for virtual gate way. (Not for LPR card gate way) 3. Connection?

96 VoIP Net H323 IP-G/W Call Making call: The TDE/NCP makes a call with fast connection mode. The other PBX replies with non fast connection mode. Before Ver.4: PBX does not accept this reply, disconnect the call. Ver.4: Support H.245 Negotiation. Improve VoIP (H.323) Connection - 3 Support Non-Fast Connect Virtual H323 IP-G/W 1. Call2. Reply This improvement is adapted only for virtual gate way. (Not for LPR card gate way) 3. H.245 Negotiation

97 Reserve Bit Function (06-0): H323-ID registration Default (Disable) 06-0=Disable 06-0=Enable LAN The H323-ID registration is possible. (TDE Ver.2) The PBX send Zonename information to the Gate keeper. (Ver.4) The PBX send Band Wide information to the Gate keeper. (Ver.4) Gate Keeper The H323-ID registration is not possible. Registration H323 G/W Improve VoIP (H.323) Connection - 4

98 Other Improvements

99 Ver.4 (COS setting) Other Improvements BSS Operation Programming Before Ver.4 (System Program) Ext.1001 (Operator: COS-1)Mainly un-screened call transfer. Ext.1002 (Worker: COS-2)Mainly screened call transfer.

100 PC Maintenance Console (PCMC) for Ver.4.

101 PCMC for KX-TDE/NCP Ver.4. Please use U-PCMC Ver. 6.x.x.x KX-TDE600Ver. 6.0.x.x or later KX-NCP500/1000Ver. 6.1.x.x or later KX-TDE100/200Ver. 6.2.x.x or later

102 Thank You Very Much For Your Attention

103 Modification History Edition-2 Page-11 Page 72TVR VTR Add Page 79 Page 81CS CA Page 14 Page 34Ext.2001 Ext.2002 Page 3972* * Page 58CO-to-CO call CO to Ext.1002 call. Page 59CO-to-CO call Ext.1002 to Ext.1003 call. Page1064. Ext.2003 does not answer the call and the call is re-routed to VM. The call is re-routed to VM. Edition-4 Add Page 73.

104 Edition-5 Page-51 :(Old)- The owner presses the DSS button of the D-PT. (New)- The owner presses the DSS button of the D-PT twice. - Press "Flash"/"Recall" key. Page-55 :(Old)CO-CO call Limitation Enable: Default (Ver. 4 New function) Disable: Option (Before Ver. 4 New function) (New)CO-CO call Limitation Enable: Default (Before Ver. 4 New function) Disable: Option (Ver. 4 New function) Page-56:(Old)Ver.4 Function (CO-CO call Limitation = Enable) (New)Ver.4 Function (CO-CO call Limitation = Disable) Page-72 : (Old) 2. Press VTR (New) 2. Press VTR # Page-74 : Add. Page-81 : (Old) If Ext.2001 is set C-FWD to External. (New) If Ext.2001 is set C-FWD to Internal. Edition-6 Page-2, 20-26,30-34, 36-39, Add: A/K is needed Edition-7 Page-40 Add: A/K is needed