ADAM 8000 serie January 2003. Overview ADAM 8000 series CPUs Power Supply Remote I/O – field bus Serial Communication devices Input-Output modules Special. - презентация

1 ADAM 8000 serie January 2003

2 Overview ADAM 8000 series CPUs Power Supply Remote I/O – field bus Serial Communication devices Input-Output modules Special modules

3 ADAM CPU ADAM 811x series compact / modular / decentral slave ADAM 821x series modular / modular / decentral master / slave ADAM 8517 PCI Slot CPU All Step 7 compatible All with MPI interface

4 Compact CPUs ADAM 811x Instruction set compatible with S7-300 from Siemens Incompatible with special modules from Siemens Integrated configurable DI/Os Expandable by up to 4 modules Integrated DP- Slave interface (8115-6BL20) Compact construction Real-time clock

5 ADAM-8114 PLC with transistor out –ADAM BJ00 PLC with relay out –ADAM BJ50 Dimension: 152,4 x76x 35 mm Operating temperature: C EN /EN IEC / (1G/12G)

6 ADAM PLC with transistor out –ADAM BL00 PLC as above + DP slave –ADAM BL20 Dimension: 152,4 x76x 35 mm Operating temperature: C EN /EN IEC / (1G/12G)

7 Technical Data ADAM-8114ADAM-8115 Supply voltage L+ Current consump. L+ 24VDC 65mA Work Memory /Load Mem. Cycle time. Bit/word (ms/K) Bit memory Timers/counters Inputs/Outputs 16 kB (opt. 24 resp. 32kB) / 24kB (opt. 32 resp. 40KB) 0.25 / / Byte/128Byte No. of inputs No of outputs 16 (20) DI, 4 configurable (counter/alarm); 2 potentiom. 8 (4) DO 2 configurable 16 (12) DO Rated input voltage Input voltage for 1 Input voltage for 0 Delay time Output current per channel 24VDC VDC 0...5VDC 3ms typ. 1 A

8 ADAM-82xx serie Instruction set compatible with the Siemens S7-300 (except for 318-S7 400 compatible) 3 types with different work/load memory External Memory (MMC) Status LEDs for Profibus status and diagnostics MP 2 I Interface MPI ( 8stat./ 8 dyn. connections) or serial point to-point connection to a PC Real-time clock with battery backup

9 ADAM 821x CPU Programmable with STEP 7 from Siemens MPI interface Integrated 24V power supply Integrated V-bus for periphery Internal and external memory Adressable I/O –1024 Byte Input –1024 ByteOutput

10 Technical Data CPU 821x Technical dataADAM-8214ADAM-8215ADAM-816 Rated voltage Int. Current cons. Max.current cons. 24VDC 380mA 1,5A Work/Load mem Bit memory Timers/Counters Adressable I/O d/a Typ. Cycle times bit/word 32kB/40kB / / / kB/80kB / / / kB/192kB / / /0.78 Profibus Interface Rate of transfer 9-pin D-type socket 9.6 kBaud to 12MBaud Max. 126 / without repeater max. 32 Operation temperature0 0 C C IEC /IEC IEC 801-4/IEC 801-2/GRAD3

11 ADAM-821x with DP Master Programmable with STEP 7 from Siemens MPI interface Integrated 24V power supply Integrated V-bus for periphery Internal and external memory Adressable I/O –1024 Byte Input –1024 ByteOutput

12 ADAM-821x with TCP/IP Direct connection through twisted pair over RJ45 Data throughput 100 t/sec Driver for different software zenOn, InTouch 3 version with different memory –ADAM-8114 –ADAM-8115 –ADAM-8116

13 ADAM-8517 Slot CPU Instruction set compatible with S7-300 from Siemens (except CPU 318) MP2I interface Integrated Profibus DP Ext. Memory MMC optional Operator interface PLC tool included OPC server and license for MPI included

14 Technical Data 8517 Technical dataADAM BM00 Ext. Supply voltageDC 24V, 1A Memory Load Memory Bit memory Timers/Counters Adressable I/O d/a Typ. Cycle times bit/word 512kB 1024kB / / /0.78 ms / k BlocksOB1/10/35/40/80/82/85/100/121 FBs 1024, FCs 1024, DBs2047 MP2I interface DP master interface 8sta./8dyn. Conn. (187kBaud) RS232: 38.4KB 9.6kBaud to 12MBaud

15 Power supply ADAM-8207 Wide-range input 24V DC output voltage High efficiency Installation on TS 35 rails Over temperature protection Short-circuit, overload and no load/open circuit protection Status LED: OK, OH,OL

16 Technical Data 8207 Technical dataADAM BA00ADAM BA20 Rated input voltage Frequency Rated input current - power- on surge - Buffering time (for input voltage > 150V AC) V AC 50Hz/60Hz 0.24A/AC 230V 15A max 10ms min Rated output voltage -Ripple - Open circuit protection - Rated output current - Efficiency - Parallel connection 24V ± 5% DC 90% bei I rated yes 24V ± 5% DC 90% bei I rated yes

17 Remote I/O Profibus DP master Profibus DP slave CAN open master CAN open slave Device Net slave

18 Profibus master ADAM DP01 with 9pol SubD connector ADAM DP10 with fiber optic interface

19 Technical Data DP master Technical dataADAM DP01ADAM DP10 Power supply Power consumption Galvanic isolated via back panel bus Max. 380mA > AC 500V Connection/interfaces Network topology Medium Data transfer rate Total length Max no of stations 9 pin D-type socket Linear bus, active bus terminator at both ends, radial lines permitted Screened twisted pair cable 9.6 kBaud to 12MBaud 100 m without repeaters (1000) 32 stations /126 stations (with repeater) 4-port fiber optic cable Linear structure with with dual FO cable, no bus terminator required Dual-core fibre optic cable 12MBaud Max. 50 m between stations 126 stations incl. Master Max.no of slaves Max.no. of inputs Max.no. of outputs

20 Profibus slave ADAM DP00 with 9pol SubD connector ADAM DP10 with fiber optic interface

21 Technical Data DP slave Technical dataADAM DP00ADAM DP10 Power supply Current consumption Isolation 24V DC, from ext. Power supply connected 1A max > AC 500V Connection Network topology Medium Data transfer rate Total length Max no of stations 9 pin D-type socket Linear bus, active bus terminator at both ends, radial lines permitted Screened twisted pair cable 9.6 kBaud to 12MBaud 100 m without repeaters (1000) 32 stations /126 stations (with repeater) 4-port fiber optic cable Linear structure with with dual FO cable, no bus terminator required Dual-core fibre optic cable 12MBaud Max. 50 m between stations 126 stations incl. Master Max.no of modules Max.no. digitals Max.no. analogs 32 16

22 CAN open master

23 CAN open slave Technical dataADAM CA01 Power supply Current consump. Isolation 24V DC, from ext. Power supply Max 700 mA > AC 500V Connection Network topology Medium Data transfer rate Total length Max no of stations 9 pin D-type plug Linear bus, active bus terminator at one end, radial spurlines permitted Screened three core cable 10 kBps to 1 MBps 1000 m without repeaters 127 dep. on master Max.no of modules Max.no. digitals Max.no. analogs bytes each 16 words each

24 Device Net Slave Technical dataADAM DN00 Power supply Current consump. Isolation 24V DC, ext. Power supply Bus coupler: 50mA incl.suppy to the peripheral modules: 800mA max. 500mV rms Connection Network topology Medium Communication rate Overall length of bus Max no of stations 5-pin Open Style Connector Linear bus, spur lines up to 6 m in length Screened 5-core cable 125, 250, 500 kBaud Up to 500 m 64 Max.no of modules Max. Inputs / Outputs bytes max. /256 bytes m.

25 Serial communication ADAM-240-1BA00 –20mA/RS232C interface ADAM-240-1BA10 –20mA/RS232Cinterface –Modbus ADAM CA00 –RS422/485 interface ADAM-240-1CA10 –RS422/485 interface –Modbus

26 Technical Data communication Technical dataADAM-240-1BA00/1BA10ADAM-240-1CA00/1CA10 channels Power supply Current cons. Ext. Power supply 1 5V back via back panel bus 220mA max. 24V for active 20mA 1 5V back via back panel bus 220mA max. no Isolaton Connectors/ interfaces Data trans. -00 Data trans.-10 none 25pin D-type socket RS232 and 20mA (switchable) ASCII transfer RK Baud up to 115kBaud 150Baud up to 38.4kBaud >=AC 500V, DIN pin D-type socket RS422/485 ASCII transfer RK Baud up to 115kBaud 150Baud up to 38.4kBaud Stop bits Parity Flow control ZVZ 1, 1.5, 2 (configurable) none, even, odd (configurable) None, hardware, XON/XOFF Values from 0 to 5s

27 Input/Output modules Digital input modules Digital output modules Digital In/output modul Analogue input modules Analogue output modules Analogue in/output modul

28 Digital input modules 4 DI/8 DI 16 DI 32 DI

29 Technical Data digital in Technical dataADAM FD00ADAM FF20ADAM FF30 No. of inputs Rated input voltage Signal voltage 0 Signa voltage 1 Input filter time delay Frequency Inp. Volt. Input Impedance Power supply Current consumption Isolation 4 AC/DC V AC/DC V AC/DC V 25ms Hz 136 5V back panel bus 80mA back panel 500V eff 8 AC/DC V AC/DC V AC/DC V 25ms Hz 136 5V back panel bus 80mA back panel 500V eff 8 AC/DC V AC/DC V AC/DC V 25ms Hz 16,4 5V back panel bus 80mA back panel 500V eff Input date Param./Diagn.date 1Byte (Bit 0...Bit 3) -/- Single isolated 1 Byte -/- 1 Byte -/-

30 Technical Data digital in Technical dataADAM BF00ADAM BF10ADAM BF50 No. of inputs Rated input voltage Signal voltage 0 Signa voltage 1 Input filter time delay Input cur. consumpt. Power supply Current consumption Isolation 8 AC/DC 24V (18-28,8) V ,8V 3ms typ. 7mA 5V back panel bus 20mA back panel 500V eff 8 AC/DC 24V( ,8) V ,8V 0,2ms typ. 7mA 5V back panel bus 20mA back panel 500V eff 8 AC/DC 24V( ,8) ,8V V 3ms typ. 7mA 5V back panel bus 20mA back panel 500V eff Input date Param./Diagn.date 1Byte source logic source logic sink logic

31 Technical Data digital in Technical dataADAM BH10ADAM BH20ADAM BL10 No. of inputs Rated input voltage Signal voltage 0 Signa voltage 1 Input filter time delay Input cur. consumpt. Power supply Current consumption Isolation 16 DC 24V ( ,8V) 0...5V ,8 V 3 ms typ. 7mA 5V back panel bus 30mA 500V eff 16 Incl 2 Counter 32 DC 24V ( ,8V) 0...5V ,8 V 3 ms typ. 7mA 5V back panel bus 50mA 500V eff Input date Param./Diagn.date 2Byte -/- Source logic 4Byte -/- Source logic

32 Digital outut modules 4 DI/8 DI 16 DI 32 DI

33 Technical Data digital out Technical dataADAM HD10ADAM HD20ADAM HF00 Number of outputs Rated load voltage Max. output current per channel Current cons.b.p.b. Voltage supply Switching rate 4 via relay 230VAC/max 30V DC 230V AC or 30V DC: 5A 125mA 5V via b.p.b. Max. 100Hz 4 via relay 230VAC / max 30V DC (forced by software) 230V AC:16A or 30V DC:16A 125mA 5V via b.p.b. Max. 100Hz 8 via relay 230VAC/max 30VDC 20A only with 1L AND 2L 230V AC:5A or 30V DC:5A 250mA 5V via b.p.b. Max. 100Hz Output data Parameter data Diagnostic data 1 Byte (Bit 0...Bit 3) - Single isolated 1 Byte - Single isolated 1 Byte -

34 Technical Data digital out Technical dataADAM BF00ADAM BF10ADAM BF20 Number of outputs Rated load voltage No-load current c. Total current Max. output current per channel Current cons.b.p.b. Voltage supply 8 (transistor) 24V DC ( V)ext. 10mA 1A protected 50mA 5V via b.p.b. 8 (transistor) 24V DC ( V)ext. 10mA 2A protected 50mA 5V via b.p.b. 8 (transistor) 24V DC ( V)ext. 10mA 2A protected 50mA 5V via b.p.b. Output data Parameter data Diagnostic data 1Byte - 1Byte - 1Byte - 4commen group with 2 output each

35 Technical Data digital out Technical dataADAM BH10ADAM BH20ADAM BL10 Number of outputs Rated load voltage No-load current c. Total current Max. output current per channel Max.total current Current cons.b.p.b. Voltage supply 16 (transistor) 24V DC ( V)ext. 10mA 1A protected 10A 85mA 5V via b.p.b. 16 (transistor) 24V DC ( V)ext. 10mA 2A protected 10A 100mA 5V via b.p.b. 32 (transistor) 24V DC ( V)ext. 15mA 1A protected 10A 165mA 5V via b.p.b. Output data Parameter data Diagnostic data 2Byte - 2Byte - 4 Byte -

36 Digital input-output modul Technical dataADAM BF00 No. of channels Rated load voltage No-load current consumption Output current per channel Rated input voltage Signal voltage 0 Signal voltage 1 Input filter time delay Input current Voltage supply Current cons. Via b.p.b. Data requirements in process image 8 DC 24V ( V) ext. 50mA 1A protected 24 DC ( V) V V 3ms typ. 7mA 5V back panel bus 60mA 1Byte PAA, 1 Byte PAE Input/Output data1Byte/1Byte

37 Analogue input modules 4/8 8 (4 wire)

38 Technical Data analog input Technical dataADAM BD52ADAM BD60ADAM BF00 No. of inputs Current range Input resistance Power supply Current consump. Isolation 4 differentielle Inductiv 100M v Capacitive 100k v current) 5V back panel bus 240mA b. p.b. 500V eff 4 single isolated mA 20 5V back panel bus 280mA b. p.b. 500V eff 8 5V back panel bus 280mA b. p.b. 500V eff Input data Parameter date Diagnostic data 8 Byte (1Word /chan.) 10 Byte 4Byte multiinput 8 Byte(1Word /chan.) - 16Byte(1Word /chan.) 10Byte 12Byte Thermo coupler JKT PT mV

39 Analogue output modul Technical dataADAM BD50 No. of outputs Voltage range Current range Actuator resistance Short circuit cur. Power supply Current consumption Isolation 4 +/-10V, V, V +/-20mA, mA, mA Min 500 (v) max. 500 (c) 30mA 5V back p.b. 24V externally Back panel bus 20mA 24V DC externally 200 mA 500Vrms Output data Parameter data Diagnostic data 8Byte (1word per channel) 6 Byte 4 Byte

40 Analogue input-output modul Technical dataADAM BD50 No. of inputs/ outputs voltage range Current range Input resistance Actuator resistance (for outputs) Short circuit current Power supply Current consumption Isolation 2/2 +/-10V, 1...5V, V +/- 20mA, 4..20mA, 0..20mA 100 k (volt.) 50 (current) Min.500 (voltage) max 500 (current) 30mA 5V back p.b. 24V extern. bpb 20mA ext. 100mA 500V eff Input data Output data Parameter data Diagnostic data 4Byte (1 word per channel) 6 Byte 4Byte

41 Special modules counter Technical dataADAM BA00 Number of counter Resolution bit operating modes 2bzw Bit / 16Bit 26 Counter rate Current consumption isolation Output stage Ext. Power supply Signal voltage 0 Signal voltage 1 Max. 1MHz 80mA via back panel bus Yes DC 24V high side switch 0,5A DC 24V ( ,8V) V V Input data / Outp.data Parameter data diagnostic data 10Byte / 10Byte 2Byte -

42 Any further questions? Thanks for your attention.