Copyright ® 2000 MSC.Software Introduction to MSC.Patran PAT301 Workbook October 2003 MSC.Software Corporation United States MSC.Patran Support Tel: 1-800-732-7284. - презентация

1 Copyright ® 2000 MSC.Software Introduction to MSC.Patran PAT301 Workbook October 2003 MSC.Software Corporation United States MSC.Patran Support Tel: Fax: Tokyo, Japan Tel: Fax: Munich, Germany Tel: (+49) Fax: (+49) MacArthur Place Santa Ana, CA 92707, USA Tel: (714) Fax: (714) Web: Part Number: P3*V2004*Z*Z*Z*SM-PAT301-WBK

2 Copyright ® 2000 MSC.Software DISCLAIMER MSC.Software Corporation reserves the right to make changes in specifications and other information contained in this document without prior notice. The concepts, methods, and examples presented in this text are for illustrative and educational purposes only, and are not intended to be exhaustive or to apply to any particular engineering problem or design. MSC.Software Corporation assumes no liability or responsibility to any person or company for direct or indirect damages resulting from the use of any information contained herein. User Documentation: Copyright 2003 MSC.Software Corporation. Printed in U.S.A. All Rights Reserved. This notice shall be marked on any reproduction of this documentation, in whole or in part. Any reproduction or distribution of this document, in whole or in part, without the prior written consent of MSC.Software Corporation is prohibited. MSC and MSC. are registered trademarks and service marks of MSC.Software Corporation. NASTRAN is a registered trademark of the National Aeronautics and Space Administration. MSC.Nastran is an enhanced proprietary version developed and maintained by MSC.Software Corporation. MSC.Patran is a trademark of MSC.Software Corporation. All other trademarks are the property of their respective owners.

3 Copyright ® 2000 MSC.Software TABLE OF CONTENTS Workshop Page 1.0 Piston Head Analysis ………………………….…………………………………………………………………… Cantilevered Plate …………………………………………………………………………………………………… Frame Model Creation Using Curves, And Analysis …….……………………………………………… Mid-Surface Extraction Example.………………………...…………..……………………….…...…………… Frame Surfaces Cretion …………………………………………...……………………………………………… Frame Surfaces Model Analysis …………………………………..…………………………..……………… Parasolid Solid Example …………………………………………………………………...…………….……… Various Methods of Solid Meshing …………………………………………………..………………………… Anchor Geometry Creation ……………….………………………………………………………….…..……… Tetmeshing Anchor Geometry and Verifying Mesh Quality …………………………………………… Anchor Loads and Boundary Conditions Using a Field ………………………………...……………… Cantilevered Beam Using 1D or 2D Elements, and Analysis …………………………………...……… Anchor Material and Element Properties ………………………………………………....…………...…… Anchor Analysis …………………………………………………………………………….……………………… Using Lists and Groups ………………………………………………………………...…………………...…… Connecting Rod Using 1D and 2D Elements …………………………………………………………...…… Box Bean With Transient Load ………………………………………………………..………………………… Post Processing With Insight ……………………………………………………….…………………………… Connecting Rod Using 2D Elements ………………………………………………………………………… Connecting Rod Using 3D Elements From Sweep ………………………...………………...……….…

4 Copyright ® 2000 MSC.Software