Скачать презентацию

Идет загрузка презентации. Пожалуйста, подождите

Презентация была опубликована 4 года назад пользователемФёдор Жилинский

1 Charles Kime & Thomas Kaminski © 2008 Pearson Education, Inc. (Hyperlinks are active in View Show mode) Chapter 2 – Combinational Logic Circuits Part 3 – Additional Gates and Circuits Logic and Computer Design Fundamentals

2 Chapter 2 - Part 3 2 Overview Part 1 – Gate Circuits and Boolean Equations Binary Logic and Gates Boolean Algebra Standard Forms Part 2 – Circuit Optimization Two-Level Optimization Map Manipulation Practical Optimization (Espresso) Multi-Level Circuit Optimization Part 3 – Additional Gates and Circuits Other Gate Types Exclusive-OR Operator and Gates High-Impedance Outputs

3 Chapter 2 - Part 3 3 Other Gate Types Why? Implementation feasibility and low cost Power in implementing Boolean functions Convenient conceptual representation Gate classifications Primitive gate - a gate that can be described using a single primitive operation type (AND or OR) plus an optional inversion(s). Complex gate - a gate that requires more than one primitive operation type for its description Primitive gates will be covered first

4 Chapter 2 - Part 3 4 Buffer A buffer is a gate with the function F = X: In terms of Boolean function, a buffer is the same as a connection! So why use it? A buffer is an electronic amplifier used to improve circuit voltage levels and increase the speed of circuit operation. XF

5 Chapter 2 - Part 3 5 NAND Gate The basic NAND gate has the following symbol, illustrated for three inputs: AND-Invert (NAND) NAND represents NOT AND, i. e., the AND function with a NOT applied. The symbol shown is an AND-Invert. The small circle (bubble) represents the invert function. X Y Z ZYX)Z,Y,X(F

6 Chapter 2 - Part 3 6 NAND Gates (continued) Applying DeMorgan's Law gives Invert-OR (NAND) This NAND symbol is called Invert-OR, since inputs are inverted and then ORed together. AND-Invert and Invert-OR both represent the NAND gate. Having both makes visualization of circuit function easier. A NAND gate with one input degenerates to an inverter. X Y Z ZYX)Z,Y,X(F

7 Chapter 2 - Part 3 7 NAND Gates (continued) The NAND gate is the natural implementation for CMOS technology in terms of chip area and speed. Universal gate - a gate type that can implement any Boolean function. The NAND gate is a universal gate as shown in Figure 2-24 of the text. NAND usually does not have a operation symbol defined since the NAND operation is not associative, and we have difficulty dealing with non-associative mathematics!

8 Chapter 2 - Part 3 8 NOR Gate The basic NOR gate has the following symbol, illustrated for three inputs: OR-Invert (NOR) NOR represents NOT - OR, i. e., the OR function with a NOT applied. The symbol shown is an OR-Invert. The small circle (bubble) represents the invert function. X Y Z ZYX)Z,Y,X(F +

9 Chapter 2 - Part 3 9 NOR Gate (continued) Applying DeMorgan's Law gives Invert-AND (NOR) This NOR symbol is called Invert-AND, since inputs are inverted and then ANDed together. OR-Invert and Invert-AND both represent the NOR gate. Having both makes visualization of circuit function easier. A NOR gate with one input degenerates to an inverter. X Y Z

10 Chapter 2 - Part 3 10 NOR Gate (continued) The NOR gate is a natural implementation for some technologies other than CMOS in terms of chip area and speed. The NOR gate is a universal gate NOR usually does not have a defined operation symbol since the NOR operation is not associative, and we have difficulty dealing with non-associative mathematics !

11 Chapter 2 - Part 3 11 Exclusive OR/ Exclusive NOR The eXclusive OR (XOR) function is an important Boolean function used extensively in logic circuits. The XOR function may be; implemented directly as an electronic circuit (truly a gate) or implemented by interconnecting other gate types (used as a convenient representation) The eXclusive NOR function is the complement of the XOR function By our definition, XOR and XNOR gates are complex gates.

12 Chapter 2 - Part 3 12 Exclusive OR/ Exclusive NOR Uses for the XOR and XNORs gate include: Adders/subtractors/multipliers Counters/incrementers/decrementers Parity generators/checkers Definitions The XOR function is: The eXclusive NOR (XNOR) function, otherwise known as equivalence is: Strictly speaking, XOR and XNOR gates do no exist for more that two inputs. Instead, they are replaced by odd and even functions. YXYXYX YXYXYX

13 Chapter 2 - Part 3 13 Truth Tables for XOR/XNOR Operator Rules: XOR XNOR The XOR function means: X OR Y, but NOT BOTH Why is the XNOR function also known as the equivalence function, denoted by the operator ? X Y X Y X Y or X Y (X Y)

14 Chapter 2 - Part 3 14 XOR/XNOR (Continued) The XOR function can be extended to 3 or more variables. For more than 2 variables, it is called an odd function or modulo 2 sum (Mod 2 sum), not an XOR: The complement of the odd function is the even function. The XOR identities: X1XX0X 1XX0XX XYYX ZYX)ZY(XZ ) YX( ZYXZYXZYXZYXZYX

15 Chapter 2 - Part 3 15 Symbols For XOR and XNOR XOR symbol: XNOR symbol: Shaped symbols exist only for two inputs

16 Chapter 2 - Part 3 16 XOR Implementations The simple SOP implementation uses the following structure: A NAND only implementation is: X Y X Y X Y X Y

17 Chapter 2 - Part 3 17 Odd and Even Functions The odd and even functions on a K-map form checkerboard patterns. The 1s of an odd function correspond to minterms having an index with an odd number of 1s. The 1s of an even function correspond to minterms having an index with an even number of 1s. Implementation of odd and even functions for greater than four variables as a two-level circuit is difficult, so we use trees made up of : 2-input XOR or XNORs 3- or 4-input odd or even functions

18 Chapter 2 - Part 3 18 Example: Odd Function Implementation Design a 3-input odd function F = X Y Z with 2-input XOR gates Factoring, F = (X Y) Z The circuit: X Y Z F

19 Design a 4-input odd function F = W X Y Z with 2-input XOR and XNOR gates Factoring, F = (W X) (Y Z) The circuit: Chapter 2 - Part 3 19 Example: Odd Function Implementation W X Y F Z

20 Chapter 2 - Part 3 20 Parity Generators and Checkers In Chapter 1, a parity bit added to n-bit code to produce an n + 1 bit code: Add odd parity bit to generate code words with even parity Add even parity bit to generate code words with odd parity Use odd parity circuit to check code words with even parity Use even parity circuit to check code words with odd parity Example: n = 3. Generate even parity code words of length four with odd parity generator: Check even parity code words of length four with odd parity checker: Operation: (X,Y,Z) = (0,0,1) gives (X,Y,Z,P) = (0,0,1,1) and E = 0. If Y changes from 0 to 1 between generator and checker, then E = 1 indicates an error. X Y Z P X Y Z E P

21 Chapter 2 - Part 3 21 Hi-Impedance Outputs Logic gates introduced thus far have 1 and 0 output values, cannot have their outputs connected together, and transmit signals on connections in only one direction. Three-state logic adds a third logic value, Hi- Impedance (Hi-Z), giving three states: 0, 1, and Hi-Z on the outputs. The presence of a Hi-Z state makes a gate output as described above behave quite differently: 1 and 0 become 1, 0, and Hi-Z cannot becomes can, and only one becomes two

22 Chapter 2 - Part 3 22 Hi-Impedance Outputs (continued) What is a Hi-Z value? The Hi-Z value behaves as an open circuit This means that, looking back into the circuit, the output appears to be disconnected. It is as if a switch between the internal circuitry and the output has been opened. Hi-Z may appear on the output of any gate, but we restrict gates to: a 3-state buffer, or Optional: a transmission gate (See Reading Supplement: More on CMOS Circuit-Level Design), each of which has one data input and one control input.

23 Chapter 2 - Part 3 23 The 3-State Buffer For the symbol and truth table, IN is the data input, and EN, the control input. For EN = 0, regardless of the value on IN (denoted by X), the output value is Hi-Z. For EN = 1, the output value follows the input value. Variations: Data input, IN, can be inverted Control input, EN, can be inverted by addition of bubbles to signals. IN EN OUT Symbol Truth Table

24 Data Selection Function: If s = 0, OL = IN0, else OL = IN1 Performing data selection with 3-state buffers: Since EN0 = S and EN1 = S, one of the two buffer outputs is always Hi-Z plus the last row of the table never occurs. Chapter 2 - Part State Logic Circuit IN0 IN1 EN0 EN1 S OL EN0IN0EN1IN1OL 0X100 0X X0 110X1 0X0XX

25 Chapter 2 - Part 3 25 Terms of Use All (or portions) of this material © 2008 by Pearson Education, Inc. Permission is given to incorporate this material or adaptations thereof into classroom presentations and handouts to instructors in courses adopting the latest edition of Logic and Computer Design Fundamentals as the course textbook. These materials or adaptations thereof are not to be sold or otherwise offered for consideration. This Terms of Use slide or page is to be included within the original materials or any adaptations thereof.

Еще похожие презентации в нашем архиве:

Готово:

Charles Kime & Thomas Kaminski © 2008 Pearson Education, Inc. (Hyperlinks are active in View Show mode) Chapter 3 – Combinational Logic Design Part 2 –

Charles Kime & Thomas Kaminski © 2008 Pearson Education, Inc. (Hyperlinks are active in View Show mode) Chapter 3 – Combinational Logic Design Part 2 –

© 2019 MyShared Inc.

All rights reserved.